Extend enterprise class protection, performance, and reliability to remote office workers. The ProSafe Dual WAN Gigabit Firewall Router provides powerful yet economical security for businesses coping with the increasing performance demands and complexities of intra-LAN network protection. Dual 10/100 WAN ports let you connect a second link to your ISP or headquarters office, providing failover protection. A Stateful Packet Inspection (SPI) firewall, 3DES and 256-bit AES encryption, IPSec support, anti-virus options, and up to 25 IPSec VPN tunnels assures safe network computing.

Featuring two 10/100 Mbps WAN ports and four Gigabit LAN ports, advanced networking features like QoS and dynamic routing, the ProSafe Dual WAN Gigabit Firewall Router is ideal for your growing network. Management capabilities through SNMP or web browser minimize on-site support requirements. NETGEAR’s timesaving VPN Wizard and SmartWizard simplify setup and VPN administration. Big company features at small company prices--that’s NETGEAR value.

Connectivity
-# Ports 4
Protocols
Networking Protocol -Gigabit Ethernet
Switching Protocol -Ethernet

Actual Weight 1.37 lbs.

Contents
-FVS124G ProSafe VPN Firewall 25
-Resource CD with Single-user ProSafe VPN Client Software
-Power adapter
-Ethernet cable
-Installation guide
-Warranty / Support Information card

Memory Notes Processor: 200 MHz 32-bit RISC

Memory: 4MB Flash, 16MB DRAM

Ports/Connectors LAN ports: Four (4) 10 / 100/1000 Mbps auto-sensing, AutoUplink RJ-45 ports

WAN port: Two (2) 10/100Mbps Ethernet RJ-45 ports with auto fail-over and load balancing

Power Notes Power requirements: 12V DC, 1.2A - plug is localized to country of sale

System Requirements
Cable, DSL or wireless broadband modem and Internet service
Ethernet connectivity from broadband modem
Network card for each connected PC
Network software (e.g. Windows)
Internet Explorer 5.0 or higher or Netscape Navigator 4.7 or higher

Warranty - Labor 3 Years
Warranty - Parts 3 Years

Hitachi

Consumer personal computers and mid-range servers demand high capacity and high performance storage to meet consumer''s digital media needs and growth ATA server application requirements. The 400GB Deskstar T7K500 meets these performance requirements and delivers the high capacity for today''s applications. Providing 3Gbps transfer speeds, 8.5ms seek times and 7200 RPM spindle speeds, the T7K500''s performance is second to none.

Connectivity
Connector Type SATA 3.0 Gbps
Connector Serial ATA 7-pin
General
Form Factor 3.5"
Enclosure Type Internal
Target Use Computer
Performance
Data Transfer Rate 3 Gbps
Average Seek Time 8.5 ms
Buffer Size, Cache 8 MB
Storage
Hard Drive Capacity 400 GB
Spindle Speed 7200 rpm
Actual Weight 1.40 lb(s)
Contents drive, documentation
Ports/Connectors 7-pin SATA port
Power Notes Power Requirement: 5 VDC ( / - 5 percent), 12 VDC ( 10 percent / -8 percent)
Startup current (max. A): 2.0 ( 12V) & 1.3 ( 5V)
Idle (W): 7.0 (3 disk) / 6.0 (2 disk)

- Serial ATA 7-pin Serial ATA 7-pin connector
- 8.5ms 8.5ms Average seek time / Up to 7200rpm 7200rpm performance
- Spindle speed is 7200rpm 7200rpm / Buffer size is 8MB cache
- Warranty: N/A

Warranty - Labor N/A
Warranty - Parts N/A

9'' RCA Component Video Cable with Gold Connectors. Flexible connections.

Length: 9'

90 days